News Daily

The Times

Australia

  • Written by The Conversation
Illustration of the structure of an egg in cross section.

We’ve all been there – trying to peel a boiled egg, but mangling it beyond all recognition as the hard shell stubbornly sticks to the egg white. Worse, the egg ends up covered in chewy bits of adhesive membrane in the end.

The internet is littered with various “hacks” that claim to prevent this problem. But there are several reasons why eggs can be hard to peel. Luckily, that means there are also science-based strategies we can use to avoid the problem.

Egg ‘peelability’ factors

Eggs consist of a hard, porous shell, an inner and outer membrane, the egg white (albumen), and a membrane-encased yolk at the centre. There is also an air cell between the inner and outer membrane next to the shell.

Illustration of the structure of an egg in cross section.
Chicken eggs have a shell, an outer membrane and an inner membrane. Twinkle Picture/Shutterstock

A lot of research was done in the late 1960s and 1970s on factors that affect the peelability of eggs after they’ve been boiled.

One of these factors is the pH of the egg white. An early study from the 1960s indicated that the pH of the egg white needs to be in the range of 8.7–8.9, quite alkaline, in order for the egg to be easier to peel.

Storage temperature has a role to play, too. A study from 1963 showed that storing eggs at about 22 degrees Celsius (or 72 degrees Fahrenheit) gives a better peelability result than storage at lower temperatures of 13°C, or even fridge temperatures at 3–5°C.

Of course, there is a risk of spoilage if eggs are stored at higher ambient temperatures.

In the studies, an increase in storage time before boiling – using less fresh eggs – also increased the ease of peelability.

A carton of eggs in a wooden table.
The older the eggs, the easier they might be to peel. Caroline Attwood/Unsplash

Step one: avoid fresh eggs

The fact that fresh eggs are harder to peel is relatively well known. Based on the factors above, there are a couple of reasons for this.

For one, in a fresh egg the air cell is still quite small. As the egg ages, it (very) slowly loses moisture through the porous shell, increasing the size of the air cell while the rest of the egg contents shrink. A bigger air cell makes it easier to start the peeling action.

Additionally, egg whites, although they already start out relatively alkaline, increase in pH as the eggs age, also making them easier to peel.

Step two: water temperature

Some keen egg boiling pundits believe that starting off with boiling water and lowering it to a simmer before gently placing the eggs into it provides a better result. However, you want to do this with room temperature eggs to avoid them cracking due to a sudden temperature change.

The reasoning behind this approach is that exposure to higher temperatures from the start of cooking also makes it easier for the membrane to come away from the shell and egg white.

Furthermore, the quick hot start makes it easier for the egg white proteins to denature (change structure as they cook) and bond to each other, rather than to the membrane.

After boiling eggs for the desired amount of time (typically 3–5 minutes for runny yolks, 6–7 minutes for jammy yolks, and 12–15 minutes for hard boiled), you can quench them in ice water. This should help the egg white to slightly shrink away from the shell, improving peelability.

Eggs boiling in a pot on a gas cooktop. Starting in hot water might help peelability, especially if you plunge the eggs in ice water afterwards. Max4e Photo/Shutterstock

Step three (optional): adding things to the water

Some other suggestions to improve peelability include adding salt to the boiling water, but this has mixed results. In one study, this approach did actually improve peelability, but this effect was lost after eggs had been stored for longer periods.

Acids and alkali have also been shown to aid eggshell peelability or removal. The patent that describes this used rather harsh substances with the goal to dissolve away the shell.

But based on this idea, you could try adding baking soda or vinegar to the water. With vinegar, the theory is that it attacks the calcium carbonate in the eggshell to then aid its removal. As for baking soda, because it’s alkaline, it could help detach the membrane from the shell.

Bonus: alternative cooking methods

There are other methods for hard-cooking eggs, such as pressure steaming, air-frying and even microwaving.

In steaming eggs, some proponents theorise that water vapour permeates the eggshell, loosening the membrane from the egg white, and thereby making the egg much easier to peel.

While studies have recently been done on the air-frying of other foods, there is still scope to further understand how this style of cooking might affect eggshells and peelability.

Lastly, once you have successfully separated the eggshells, don’t just throw them in the bin. There are lots of different uses for them, including compost, slug and snail deterrent in your garden, using them as little biodegradable pots for seedlings, or even something as advanced as scaffolds for cancer research.

Read more https://theconversation.com/is-there-a-best-way-to-peel-a-boiled-egg-a-food-scientist-explains-235895

Split Corrugated Conduit for Flexible Cable Protection

For wiring assemblies in vehicles, machinery and equipment, choosing suitable cable protection helps keep cables organised and reduces direct contact with surrounding parts. Mojak Plastics supplies plastic tubing and conduit options for different installation needs, and split corrugated conduit can... Read more

Trailers Melbourne Buyers Can Compare: When Box Trailers Make Sense

For many homeowners, businesses and tradespeople, trailers Melbourne customers use every week need to be versatile enough for changing loads. A box trailer can be particularly useful because its enclosed sides help contain cargo while providing a straightforward loading area... Read more

Bottle Label Printing That Balances Design and Readability

Product labels need to attract attention while making information easy to find and understand. On a bottle, the available space may be limited by the container’s shape, so every design decision matters. Bottle label printing should account for visual hierarchy... Read more

Office Cleaning Melbourne: Planning a Consistent Workplace Routine

Businesses looking for office cleaning Melbourne need a plan that reflects the way their workplace operates. A clean office supports day-to-day organisation, helps shared spaces remain presentable and gives employees and visitors a more orderly environment. Eco Green Cleaning Management... Read more

Pinboard Solutions for Offices, Schools and Shared Information Spaces

Why a Pinboard Remains Useful A pinboard provides a simple way to display information that needs to remain visible without being rewritten. Lawdex supplies fabric and cork options for offices, schools, staff areas and other environments. A pinboard can be used... Read more

Retractable Hose Reel: A Practical Guide To Choosing The Right Hose Storage

A retractable hose reel can make hose storage more organised, accessible and practical in workshops, commercial facilities, service areas and other working environments. Instead of leaving a hose coiled across the floor or requiring staff to manually wind it after... Read more